actuators_527x339

µBrick blind actuators – decentralized shading solution

µBrick are actuators for sun protection and shading. The small design enables decentralized installation in ceilings, floors or installation channels, so that the installation effort can be reduced considerably. µBrick actuators with binary inputs also allow the connection of window contacts, potential-free switches and sensors. All µBrick channels are single-phase supplied with the drive voltage. Each channel can be loaded with a maximum resistive load of 10 A.

Regardless of the function selection, status objects provide the current switching state or the position of the blinds or shutters.

If necessary, the firmware of the actuators can be updated using an update SD card.

The application modules, which can be used independently of the inputs and outputs, make µBrick switch actuators into decentralized control centers for all automation tasks in buildings.

Video Size Play Download
Actuator series µBrick 10 MB
µBrick si36 Order-no. Request
mBrick-si36_85_90 KNX blind actuator with 3 output channels and 6 inputs. The blind actuator has 3 channels (A, B, C) with 2 switch contacts each for up to 3 shutter or blind motors. Each channel has a resistive load of max. 10A (maximum load of the actuator 30A). Each contact can be operated manually via buttons with acknowledgment. The inputs can be configured in the ETS as potential-free binary inputs or as analogue input for the connection of the µBrick temperature sensor. The ETS application program enables the configuration of numerous, independent additional functions such as timer, scenes, alarms, etc. The device is available in a plastic casing for DIN rail mounting or decentralized installation in a flush-mounted box or installation channel. Dimensions: 70x105x24 mm 72130-180-11 icon-anfrage

µBrick si36 X Order-no. Request
mBrick-si36 X_85_90 KNX blind actuator with 3 output channels and 6 inputs The blind actuator has 3 channels (A, B, C) with 2 switch contacts each for up to 3 shutter or blind motors. Channel A can be configured to switch any load up to 10A. The shutter channels B and C have a resistive load of max. 10A (maximum load of the actuator 30A). Each contact can be operated manually via buttons with acknowledgment. The inputs can be configured in the ETS as potential-free binary inputs or as analogue input for the connection of the µBrick temperature sensor. The ETS application program enables the configuration of numerous, independent additional functions such as timer, scenes, alarms, etc. The device is available in a plastic casing for DIN rail mounting or decentralized installation in a flush-mounted box or installation channel. Dimensions: 70x105x40 mm 72130-180-12 icon-anfrage

µBrick s4 Order-no. Request
mBrick-s4_85_90 The KNX blind actuator has 4 channels (A, B, C, D) with 2 switch contacts each for up to 4 shutter or blind motors. Each channel has a resistive load of max. 10A (maximum load of the actuator 40A). Each contact can be operated manually via buttons with acknowledgment. The ETS application program enables the configuration of numerous, independent additional functions such as timer, scenes, alarms, etc. The device is available in a plastic casing for DIN rail mounting or decentralized installation in a flush-mounted box or installation channel. Dimensions: 70x105x24 mm 72130-180-13 icon-anfrage

µBrick s6 X Order-no. Request
mBrick-s6 X_85_90 The KNX blind actuator has 6 channels (A, B, C, D, E, F) with 2 switch contacts each for up to 6 shutter or blind motors. Channel A and B can be configured to switch any load up to 10A. The shutter channels C, D, E and F  have a resistive load of max. 10A (maximum load of the actuator 60A). Each contact can be operated manually via buttons with acknowledgment. The ETS application program enables the configuration of numerous, independent additional functions such as timer, scenes, alarms, etc. The device is available in a plastic casing for DIN rail mounting or decentralized installation in a flush-mounted box or installation channel. Dimensions: 70x105x40 mm 72130-180-14 icon-anfrage

µBrick s9 Order-no. Request
mBrick-s9_85_90 The KNX blind actuator has 9 channels (A to I) with 2 switch contacts each for up to 9 shutter or blind motors. Each channel has a resistive load of max. 10A (maximum load of the actuator 90A). Each contact can be operated manually via buttons with acknowledgment. The ETS application program enables the configuration of numerous, independent additional functions such as timer, scenes, alarms, etc. The device is available in a plastic casing for DIN rail mounting or decentralized installation in a flush-mounted box or installation channel. Dimensions: 70x105x40 mm  72130-180-15 icon-anfrage

µBrick io64 X Order-no. Request
 µBrick-io64X_85_90 KNX switching actuator with 4 outputs and 6 inputs. Channels A and B can be configured to switch any load up to 10 A. The ETS application program enables the configuration of numerous, independant additional functions such as timer, scenes, alarms manual mode, etc. The device is available in a plastic casing for DIN rail mounting or decentralized installation in a flush-mounted box or installation channel. Dimensions: 70x105x40mm  72130-180-06 icon-anfrage
Name Size* Version
Documents APP 3.4 V1.0
BMA-si36 0.8 V1.0
BMA-si36x 0.8 V1.0
BMA-s4 0.8 V1.0
BMA-s6x 0.8 V1.0
BMA-s9 0.8 V1.0

Software ETS4/5 (knxprod)-si36 2.2 V1.0
ETS4/5 (knxprod)-si36x 2.3 V1.0
ETS4/5 (knxprod)-s4 1.4 V1.0
ETS4/5 (knxprod)-s6x 1.9 V1.0
ETS4/5 (knxprod)-s9 1.9 V1.0

Catalogues Actuators 8 V1.0-2018
Main 11 V1.0-2018

* all figures in MB